From: Jonathan Chin Kah Fi (kachin@xxxxxxxxx)
Date: Fri Nov 23 2001 - 13:56:52 GMT-3
Sounds alright to me....but can interface fa0.3 be assigned an ip address if it
is
also in the bridge-group?
interface fa0.2
encap isl 2
interface fa0.3
ip address <network 1.a>
encap isl 3
bridge-group 1
interface fa0.4
encap isl 4
bridge-group 1
inter bvi 1
ip address <network 2>
bridge 1 protocol ieee
bridge 1 route ip
Rivron Francois wrote:
> One proposition:
>
> Assume that stations on vlan 3 & 4 have their ip @ in network 1
>
> interface fa0.2
> encap isl 2
> ip ad <network 2>
>
> interface fa0.3
> encap isl 3
> bridge-group 1
>
> interface fa0.4
> encap isl 4
> bridge-group 1
>
> interface bvi 1
> ip ad <network 1>
>
> bridge 1 route ip
> bridge 1 protocol ieee
>
> FRI
>
> > -----Message d'origine-----
> > De: Jonathan Chin Kah Fi [SMTP:kachin@cisco.com]
> > Date: vendredi 23 novembre 2001 17:10
> > @: DAN DORTON
> > Cc: ccielab@groupstudy.com
> > Objet: Re: Bridging
> >
> > I have a question here on bridging for the gurus out there...
> >
> > Suppose I have a router on a stick scenario whereby it is connected to a
> > cat5k's trunk carrying
> > vlan 2,3 and 4. So, I will have to create three sub-interfaces on the
> > router's fast ethernet interface
> > to receive each of the ISL colors. How would you configure IRB if suppose
> > you want to bridge
> > between vlan 3 and 4 and then route between vlan 2 and the bridged
> > vlans???
> >
> > Any suggestions? One BVI or two?
> >
> >
> >
> > DAN DORTON wrote:
> >
> > > Do any of you bridging guru's ou there have a list of the finer points
> > of bridging that they used for CCIE lab study?
> > >
> > > I am not looking for answers, just topics & issues to focus on.
> > >
> > > I just started working on bridging & I have built several scenarios so
> > far of the basic configurations & such. ( SRB, RSRB, SRTLB, CRB, IRB.)
> > >
> > > I know there are filtering techniques & timers too adjust also.
> > >
> > > I am getting closer to running out of time everyday & thought I would
> > try to save a little here.
> > >
> > > Thanks in advance ,
> > >
> > > Dan
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:21 GMT-3