From: michael robertson (michael_w_2ca@xxxxxxxx)
Date: Fri Nov 23 2001 - 03:17:52 GMT-3
Hi, Frank
yes, show atm ilmi-status
you will find the prefix NSAP
regards
michael
--- Frank Kim <frank@comegetus.com> wrote:
> Michael,
> Let's say if you don't have access to the switch to
> figure out what the
> nsap address is, is there a command in the router
> where you can run to
> figure out what is the nsap or esi address? Thanks.
>
>
> -Frank
>
> On Fri, 23 Nov 2001,
> michael robertson wrote:
>
> > Dear group,
> >
> > I have practiced atm lately, and the atm switch
> is
> > lightstream 1010.
> >
> > I have tried to assign the atm nsap address with
> esi
> > address, I can ping between two routers, If I
> assign
> > the atm nsap address with the following command,
> > atm nsap-address
> > 47.009181000000001007386501.888888888888.00 ,
> >
> > then I have no luck to ping other side. I debug
> atm
> > signal, and it says that E164 is not converted. In
> > this scenario, does this mean that lightstream
> can't
> > allow youself to assign your own atm address and
> the
> > only way you have to do is use atm esi address??
> >
> > Question 2:
> >
> > If I can assign atm nsap address, the first 13
> bytes
> > should be identical to ATM switch or not?
> >
> >
> > Regards
> >
> > michael
> >
> >
> > ------R1-------ATM lightstream 1010------R2----
> >
> >
> >
> >
> > Configuration is as follows:
> >
> > R1
> >
> > r1#sh run int atm2/0
> > Building configuration...
> >
> > Current configuration:
> > !
> > interface ATM2/0
> > ip address 200.10.11.16 255.255.255.0
> >
> > map-group 1483svc
> > atm nsap-address
> > 47.009181000000001007386501.999999999999.00
> > no atm scrambling cell-payload
> > atm pvc 5 0 5 qsaal
> > no atm ilmi-keepalive
> > end
> >
> > map-list 1483svc
> > ip 200.10.11.15 atm-nsap
> > 47.009181000000001007386501.888888888888.00
> broadcast
> >
> > -------------------------------
> >
> > R2:
> >
> > interface ATM2/0
> > ip address 200.10.11.15 255.255.255.0
> > map-group 1483svc
> > atm nsap-address
> > 47.009181000000001007386501.888888888888.00
> > no atm scrambling cell-payload
> > atm pvc 5 0 5 qsaal
> > no atm ilmi-keepalive
> > end
> >
> > map-list 1483svc
> > ip 200.10.11.16 atm-nsap
> > 47.009181000000001007386501.999999999999.00
> broadcast
> >
> >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:21 GMT-3