From: Hansang Bae (hbae@xxxxxxxxxx)
Date: Tue Nov 20 2001 - 01:08:36 GMT-3
At 03:20 PM 11/18/2001 -0600, Edward W. Boggs wrote:
>How would one from a terminal server connected to 9 or more IOS routers and a
>Cat 5k switch automate the following commands and configuration to the
>devices by executing a script.
>How or who would have such a script that will do the following
>connect to a terminal server with a telnet session.
>once connected to the TS then connect to each router using it's predetermined
>host name (i.e R1, R2....R11)
>execute a write erase or startup config.
>copy a new config to the startup config.
>copy startup config to running...
>then go to the next router and copy the same config to with a hostname
>difference to it..
>do this sequence util all routers and Cat5k Switch have been reset to an
>original standard...or a predetermined configuration from previous labs.
I do this with my ZOC terminal emulator. (www.emtec.com) It's one of the
most flexible telnet/ssh/com-modem clients around. It has built in scripts
as well as REXX support.
Any other decent telnet clients should have some scripting capability as well.
hsb
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:18 GMT-3