From: Nick Keir (nickkeir@xxxxxxxxxxx)
Date: Tue Nov 20 2001 - 06:48:39 GMT-3
Take a tip from the Brussels lab - they use WRQ's Reflection terminal
software which records your actions and creates VB scripts from them. You
can then edit the scripts if you need to and assign them to buttons and/or
menus. Worth the #250, or "borrowing" a copy to try out, especially if
you're going to do the lab in Brussels. I use it to automate all my
edge-to-edge pings and config saves, meaning I only have to type in that
long, repetitive list of commands once.
Try www.wrq.com
Nick
----- Original Message -----
From: "Edward W. Boggs" <eboggs@houston.rr.com>
To: <ccielab@groupstudy.com>
Sent: Monday, November 19, 2001 5:20 AM
Subject: Creating a Startup Script...
> How would one from a terminal server connected to 9 or more IOS routers
and a
> Cat 5k switch automate the following commands and configuration to the
> devices by executing a script.
>
> How or who would have such a script that will do the following
>
> connect to a terminal server with a telnet session.
> once connected to the TS then connect to each router using it's
predetermined
> host name (i.e R1, R2....R11)
>
> execute a write erase or startup config.
> copy a new config to the startup config.
> copy startup config to running...
>
> then go to the next router and copy the same config to with a hostname
> difference to it..
>
> do this sequence util all routers and Cat5k Switch have been reset to an
> original standard...or a predetermined configuration from previous labs.
>
> help...
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:18 GMT-3