From: Maurizio Roggia (mroggia@xxxxxxxxx)
Date: Sun Nov 18 2001 - 11:37:13 GMT-3
you need to configure another frame-relay map to your ip-address of your
interface with the same dlci.
Bye
Maurizio
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Fanglo MA
Sent: 18 November 2001 15:39
To: ccielab@groupstudy.com
Subject: Can't ping FR own interface
Hi ALL,
I am reviewing FR and find that I cannot ping the router own FR serial. I
can ping from other routers via the FR but I cannot ping itself from the
router. I can ping other own serial interface from the router too. Anyone
would have suggestions or reason why I can't ping? Below is my config.
R3 config
host r3
!
int s0
ip address 192.168.252.3 255.255.255.0
encap frame
frame-relay map ip 192.168.252.4 123
frame-relay map ip 192.168.252.5 124
no shut
!
int s1
ip address 192.168.250.3 255.255.255.0
no shut
!
R4 config
host r4
!
int s0
ip address 192.168.252.4 255.255.255.0
encap frame
frame-relay map ip 192.168.252.321
no shut
!
R5 config
host r5
!
int s0
ip address 192.168.252.4 255.255.255.0
encap frame
frame-relay map ip 192.168.252.3 421
no shut
!
R4, R5 can do ping to R3
R3 can do ping to R4, R5
R3 can do ping to its s1
BUT R3 TIMEOUT WHEN PING ITS S0.
Regards,
Fanglo
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:17 GMT-3