From: ohanusi anthony (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Sun Nov 18 2001 - 21:04:43 GMT-3
you need to configure another frame-relay map to the ip address on your
interface ,anytime you are using physical , point to
multipoint subinterface or when ever you configure a frame map statement.
regards
At 06:39 AM 11/18/2001, Fanglo MA wrote:
>Hi ALL,
>
>I am reviewing FR and find that I cannot ping the router own FR serial. I
>can ping from other routers via the FR but I cannot ping itself from the
>router. I can ping other own serial interface from the router too. Anyone
>would have suggestions or reason why I can't ping? Below is my config.
>
>R3 config
>host r3
>!
>int s0
> ip address 192.168.252.3 255.255.255.0
> encap frame
> frame-relay map ip 192.168.252.4 123
> frame-relay map ip 192.168.252.5 124
> no shut
>!
>int s1
> ip address 192.168.250.3 255.255.255.0
> no shut
>!
>
>R4 config
>host r4
>!
>int s0
> ip address 192.168.252.4 255.255.255.0
> encap frame
> frame-relay map ip 192.168.252.321
> no shut
>!
>
>R5 config
>host r5
>!
>int s0
> ip address 192.168.252.4 255.255.255.0
> encap frame
> frame-relay map ip 192.168.252.3 421
> no shut
>!
>
>R4, R5 can do ping to R3
>R3 can do ping to R4, R5
>
>R3 can do ping to its s1
>BUT R3 TIMEOUT WHEN PING ITS S0.
>
>Regards,
>Fanglo
Ohanusi Anthony CCNA,CCNP,CCIE Written
WAN Engineer
Network Solution, A Schlumberger Company
Email : <ohanusi@lagos.sns.slb.com>
Phone : 234-1-2610446 EXT 3230
Mobile 08033035027
Fax : 234-1-2621034
Learn to qualify your statement
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:17 GMT-3