From: Duy Nguyen (net_port@xxxxxxxxxxx)
Date: Wed Nov 14 2001 - 18:27:27 GMT-3
I hope I get a job for answering this question. You could load the file
from the router to your pc through eth port, then you could load the problem
router with the ios from your pc through eth port.
Absolutely Positively Continuously Sincerely,
Duy Nguyen CCNP/CCIE written
net_port@hotmail.com
Cell (817) 707-7451
>From: michael robertson <michael_w_2ca@yahoo.ca>
>Reply-To: michael robertson <michael_w_2ca@yahoo.ca>
>To: Courtney Alexander Foster <cfoster@cnr.edu>
>CC: ccielab@groupstudy.com
>Subject: RE: router forever recycle the same message, HELP!!!
>Date: Wed, 14 Nov 2001 15:12:44 -0500 (EST)
>
>Hi, there
>Thank you for your information.
>
> the problem here is that the router even doesn't boot
>correctly. When I boot, it come up all message, All
>the message recycle.
>
>2. i know the command to make a router as a tftp
>server. but I don't know how to connect two routers
>together. Shall I connect two router console with a
>crossover cable?
>
>Do you mean that when router boot up, it will first
>check from tftp server. If i connect two router
>console together, the router will go and find tftp
>server?
>
>
>regards
>
>michael
>
>
>--- Courtney Alexander Foster <cfoster@cnr.edu> wrote:
> > For your first question....get another IOS...Early
> > Deployment versions
> > sometimes do weird things...
> >
> > For your second question....if those router have the
> > same amount of DRAM
> > and flash....just make one of your router with the
> > IPSEC image a TFTP
> > server...and download it straight to the other
> > router.
> >
> > -----Original Message-----
> > From: michael robertson
> > [mailto:michael_w_2ca@yahoo.ca]
> > Sent: Wednesday, November 14, 2001 2:11 PM
> > To: ccielab@groupstudy.com
> > Subject: router forever recycle the same message,
> > HELP!!!
> >
> >
> > Dear my friend,
> >
> > When my router boot , it forever shows this message
> > and I don't know where it boot from? how can I solve
> > this problem?
> >
> > do you think that if I boot from pcimci card will
> > solve the problem?
> >
> > The mesage from the router is as follows:
> >
>****************************************************8
> >
> > OPTIONS: History Buffer, F-key Macros, Search
> > History
> > Buffer, I18n
> > Compiled on Apr 21 1999, 22:51:00.
> >
> > Press ALT-Z for help on special keys
> >
> >
> > System Bootstrap, Version 11.1(19)AA, EARLY
> > DEPLOYMENT
> > RELEASE SOFTWARE (fc1)
> > Copyright (c) 1998 by cisco Systems, Inc.
> >
> > System Bootstrap, Version 11.1(19)AA, EARLY
> > DEPLOYMENT
> > RELEASE SOFTWARE (fc1)
> > Copyright (c) 1998 by cisco Systems, Inc.
> >
> > System Bootstrap, Version 11.1(19)AA, EARLY
> > DEPLOYMENT
> > RELEASE SOFTWARE (fc1)
> > Copyright (c) 1998 by cisco Systems, Inc.
> >
> > System Bootstrap, Version 11.1(19)AA, EARLY
> > DEPLOYMENT
> > RELEASE SOFTWARE (fc1)
> > Copyright (c) 1998 by cisco Systems, Inc.
> >
> > System Bootstrap, Version 11.1(19)AA, EARLY
> > DEPLOYMENT
> > RELEASE SOFTWARE (fc1)
> > Copyright (c) 1998 by cisco Systems, Inc.
> >
> > ***********************************************
> >
> >
> > Second question:
> >
> > I have a router 3620 which is running the following
> > ios:
> >
> > flash:c3620-is-mz_120-5.bin
> >
> > but it doesn't support IPSec.
> >
> > But I have other router which support IPSec with ios
> > version: c3620-jo3s56i-mz_121-2_T.bin
> >
> >
> > Do you think that I can use PCIMCI card and copy the
> >
> > c3620-jo3s56i-mz_121-2_T.bin simply to the other
> > router which is running c3620-is-mz_120-5.bin.
> >
> > But I have been told that you need identical ios
> > image
> > for the same router hardware configuration.
> >
> > But for my case, one router has only two ehternet
> > port
> > but the other one has really lots of ports Faster
> > ethernet port, serial port and voice port and many
> > other ports.
> >
> > Any help will be appreciated
> >
> >
> > Cheers
> >
> > michael
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:15 GMT-3