From: Bill Carter (bcarter@xxxxxxxxxxxxxx)
Date: Wed Nov 14 2001 - 14:16:27 GMT-3
Distribute-list in prevents routes being learned into the OSPF route table.
The problem is OSPF creates the OSPF database and routes are derived from
the database. You will see on the OSPF router w/ distribute-list in, the
route(s) will not appear. If you then look at an OSPF router behind the
filtering OSPF router, the routes appears.
To prevent routes from being redistributed into OSPF you must use another
method of filtering.
Have fun searching for the answer!!!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Rajeev Siddappa
Sent: Wednesday, November 14, 2001 10:09 AM
To: ccielab@groupstudy.com
Subject: Distribute-list and OSPF
Can some one explain me how does distribute list work
for OSPF
I understnd that it will not efffect when u use it as
distribute list 1 out interface
but how is it working when I use the same as
distribute list 1 in interface .
Pls forward me if you ahve any documents.
Thanks,
Rajeev.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:15 GMT-3