From: Murphy, Brennan (Brennan_Murphy@xxxxxxx)
Date: Wed Nov 14 2001 - 13:13:27 GMT-3
We're building out an ATM network and having trouble with a couple sites.
We have Cisco 7200s in the hubs and 3600s with 4 port IMAs at the
remote sites. I can loop the line on the 3600 and from the 7200 ping
the local interface....the ping travels across the pvc to the 3600 and
back. But when we normalize the circuit, we have interface up and
line protocol down. The hub router is working fine with other PVCs.
Anyone every have any problems with the 4 port IMA on an E1 circuit?
Thanks
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:15 GMT-3