From: Bryan Ginman (ginmanb@xxxxxxxxxxx)
Date: Thu Nov 08 2001 - 14:53:57 GMT-3
when you redist are you using the subnets attribute?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Liekun Ye
Sent: Thursday, November 08, 2001 7:33 AM
To: ccielab@groupstudy.com
Subject: BGP synchro problem
Hi, group,
I have a tough problem in bgp configuration. Look at the scenario below,
Assume that bgp synchronization is enabled by default. R1 act as RR, a
connected
route 100.100.1.0/24 is redistribute into bgp 1 at R3; all three router runs
ospf,
this ibgp route is valid at R1, but shows invalid at R2, also 100.100.1.0/24
is
redistributed to ospf to make igp route synchronize with bgp route. If use
eigrp
to replace ospf as a igp, everything is ok. why ?
Any suggestion is appreciated!
+--------+ +-------+
| | | |
| R1 |------------------| R2 |
+--------+ +---|---+
| |
| |
| |
| |
| +-------+
| | |
+----------------------| R3 |100.100.1.0/24 redis into bgp
| |
+-------+
Liekun Ye
Nov. 3, 2001
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:09 GMT-3