From: Liekun Ye (liekun@xxxxxxxxxxxxx)
Date: Thu Nov 08 2001 - 09:33:19 GMT-3
Hi, group,
I have a tough problem in bgp configuration. Look at the scenario below,
Assume that bgp synchronization is enabled by default. R1 act as RR, a connecte
d
route 100.100.1.0/24 is redistribute into bgp 1 at R3; all three router runs os
pf,
this ibgp route is valid at R1, but shows invalid at R2, also 100.100.1.0/24 is
redistributed to ospf to make igp route synchronize with bgp route. If use eigr
p
to replace ospf as a igp, everything is ok. why ?
Any suggestion is appreciated!
+--------+ +-------+
| | | |
| R1 |------------------| R2 |
+--------+ +---|---+
| |
| |
| |
| |
| +-------+
| | |
+----------------------| R3 |100.100.1.0/24 redis into bgp
| |
+-------+
Liekun Ye
Nov. 3, 2001
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:08 GMT-3