From: Matt Smith (matt-n-donna@xxxxxxxxxxxxxx)
Date: Wed Nov 07 2001 - 22:20:41 GMT-3
Check the console speed setting in the register. Some freeware terminal
apps will autodetect the speed for you.
Just a thought
----- Original Message -----
From: <steven.j.nelson@bt.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, November 07, 2001 7:16 AM
Subject: Terminal Access
> All
>
> I have a 2504 TR & Serial router which does not like access through the
> console from Windows Hyperterminal, if I use freeware client like terra
term
> it has no problems, all my other routers are fine with hyperterm.
>
> If I boot the 2504 with the console attached and hyperterm running I get
the
> POST output but when it comes to "Press Return to get started" the machine
> does not respond, close hyperterm and run terra term and the box is fine
??
>
> Is this a config register thing ?
>
> Cheers
>
> Steve
>
> Steve Nelson
> Customer Engineer
> BT Ignite- National Solutions
> T: +44 (0)1422 338881 M: +44 (0)7811 944172
> e-mail: steven.j.nelson@bt.com
> pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> > British Telecommunications plc
> > Registered office: 81 Newgate Street London EC1A 7AJ
> > Registered in England no. 1800000.
> > This electronic message contains information from British
> Telecommunications plc which may be privileged or confidential. The
> information is intended to be for the use of the individual(s) or entity
> named above. If you are not the intended recipient be aware that any
> disclosure, copying, distribution or use of the contents of this
information
> is prohibited. If you have received this electronic message in error,
please
> notify us by telephone or email (to the numbers or address above)
> immediately.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:08 GMT-3