From: Ron Royston (ccie6824@xxxxxxxxxxx)
Date: Mon Nov 05 2001 - 19:00:51 GMT-3
The point is this, I think:
Router(config-if)#encaps ppp
Router(config-if)#compres ?
mppc MPPC compression type
predictor predictor compression type
stac stac compression algorithm
<cr>
Router(config-if)#encaps hdlc
Router(config-if)#compres ?
stac stac compression algorithm
Router(config-if)#compres
<><><><><><><><><><><><><>
Ron Royston
Avnet Enterprise Solutions
http://www.nsd.avnet.com/
>From: "Harris, Joe F" <Joe_Harris@AIMFUNDS.COM>
>Reply-To: "Harris, Joe F" <Joe_Harris@AIMFUNDS.COM>
>To: John Neiberger <neiby@excite.com>, Paul Borghese <paul98@prodigy.net>,
> ccielab@groupstudy.com
>Subject: RE: PPP Compression Methods
>Date: Mon, 5 Nov 2001 15:47:26 -0600
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/sbook/sppp.h
>tm#xtocid265016
>
>and
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/sbook/sintrf
>c.htm#xtocid1794433
>
>
>-----Original Message-----
>From: John Neiberger [mailto:neiby@excite.com]
>Sent: Monday, November 05, 2001 3:29 PM
>To: Paul Borghese; ccielab@groupstudy.com
>Subject: Re: PPP Compression Methods
>
>
>Paul,
>
>It appears that ppp compression stacker is a hidden command, but when I
>tried it the router simply added 'compress stac' to the config. I wasn't
>able to find any documentation regarding 'ppp compression stacker'.
>
>John
>
>On Mon, 5 Nov 2001 15:58:17 -0500, Paul Borghese wrote:
>
>| Does anyone know the difference between the two compression commands:
>|
>| Inter s0
>| encap ppp
>| ppp compression stacer
>|
>| and
>|
>| inter s0
>| encap ppp
>| compression stac
>|
>| Paul Borghese
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:04 GMT-3