From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Mon Nov 05 2001 - 06:39:19 GMT-3
I do a quick check on a 3640 with VIC-2BRI-S/T-TE with IOS 12.1(9), some
interface command for ISDN is not available abd I could not proceed any
further. My guess that the card which in my router does not support
configuration to turn ISDN BRI to layer1 and protocol emulate , can someone
confirm this:
ie interface-if# isdn layer1-emulate
isdn protocol-emulate [user| network}
both are not available.
> Parry Chua
>
-----Original Message-----
From: KK FoK [mailto:rgb98a@hotmail.com]
Sent: Monday, November 05, 2001 4:36 PM
To: ccielab@groupstudy.com
Subject: 2600/3600 as ISDN simulator
There is some discussion going on about using 2600/3600, together with
VIC-2BRI-NT/NE, as ISDN simulator. I've breifly gone through the cisco web
site and learned that its use is for PABX connection only.
Does anyone know if this 2600/3600 VIC-2BRI-NT/NE combaination can
configured in such a way that deployed as real ISDN simulator for lab use ?
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:03 GMT-3