From: Brian Lodwick (xpranax@xxxxxxxxxxx)
Date: Mon Oct 29 2001 - 17:46:35 GMT-3
I've actually figured everything out. I am just getting the pre-lab jitters.
If I have any issues with anything I get worried. I want to be extremely
solid with everything since my lab is on Thursday. The problem I believe was
that my bvi that was mapped to the Token-Ring interface defaulted to
Novell-Ether. When I changed it to encapsulation SAP it worked.
>>>Brian
>From: Frank Jimenez <franjime@cisco.com>
>To: "Brian Lodwick" <xpranax@hotmail.com>
>Subject: Re: Any IPX experts out there?
>Date: Mon, 29 Oct 2001 14:39:10 -0600
>
>Be happy to take a look at it - What kind of routers, and what are the
>configs?
>
>Frank Jimenez, CCIE #5738
>franjime@cisco.com
>
>
>At 06:14 PM 10/29/2001 +0000, you wrote:
> >I'd like to see if someone strong with IPX configuration can take a look
> >over my configs and see if they can tell me what I am doing wrong?
> >I have 2 routers connected via Token-Ring. Between them is a 3920. The ip
> >configuration works flawless, but the IPX is all screwey.
> >r4----3920----r9
> >
> >>>>Brian
> >
> >>From: "Brian Lodwick" <xpranax@hotmail.com>
> >>Reply-To: "Brian Lodwick" <xpranax@hotmail.com>
> >>To: ccielab@groupstudy.com
> >>Subject: Flakey IPX?
> >>Date: Mon, 29 Oct 2001 16:54:42 +0000
> >>
> >>I have seen this several times and it is so frustrating. I would hate to
>be
> >>in my lab and have this happen.
> >>I go and address my network with IPX and then I test ping across the
>links
> >>to the other side. Then I'll have like one link somewhere that won't
>ping a
> >>certain way. I currently have one that the one side can ping it's local
> >>interface and the other side, but the other side cannot ping back. This
>one
> >>is over a Token-Ring connection.
> >>I had it the other day on an ethernet segment where on one router I
>could
> >>ping the other side but could not ping local, and the other side I could
> >>ping local but not the other side. When I removed all of the
>configuration
> >>from the interface and readded it on both everything worked.
> >>Has anyone else ran into issues like this? Am I just doing it wrong?
>I'll
> >>add my configs for everyone to look over to see if maybe I am messing up
> >>somewhere?
> >>Any help is greatly appreciated!!!
> >>
> >>>>>Brian
> >>
> >>r2#sh run
> >>Building configuration...
> >>
> >>Current configuration:
> >>!
> >>version 12.0
> >>service timestamps debug uptime
> >>service timestamps log uptime
> >>no service password-encryption
> >>!
> >>hostname r2
> >>!
> >>!
> >>ip subnet-zero
> >>no ip domain-lookup
> >>ipx routing 0002.0002.0002
> >>ipx internal-network 200
> >>bridge irb
> >>!
> >>!
> >>!
> >>interface Loopback0
> >>no ip address
> >>no ip directed-broadcast
> >>ipx network 222
> >>!
> >>interface Serial0
> >>no ip address
> >>no ip directed-broadcast
> >>encapsulation frame-relay
> >>no ip mroute-cache
> >>logging event subif-link-status
> >>logging event dlci-status-change
> >>no fair-queue
> >>clockrate 64000
> >>!
> >>interface Serial0.1 point-to-point
> >>no ip directed-broadcast
> >>frame-relay interface-dlci 207
> >>bridge-group 1
> >>!
> >>interface Serial0.2 point-to-point
> >>ip address 105.1.23.2 255.255.255.0
> >>no ip directed-broadcast
> >>frame-relay interface-dlci 205
> >>!
> >>interface Serial1
> >>ip address 105.1.28.2 255.255.255.0
> >>no ip directed-broadcast
> >>clockrate 64000
> >>!
> >>interface TokenRing0
> >>no ip address
> >>no ip directed-broadcast
> >>ring-speed 16
> >>bridge-group 3
> >>!
> >>interface BVI1
> >>ip address 105.1.22.2 255.255.255.0
> >>no ip directed-broadcast
> >>ip ospf network non-broadcast
> >>ip ospf priority 0
> >>ipx network 702
> >>!
> >>interface BVI3
> >>ip address 105.1.31.2 255.255.255.0
> >>no ip directed-broadcast
> >>ipx network 205
> >>!
> >>router ospf 100
> >>redistribute igrp 300 subnets route-map igrp
> >>network 105.1.22.2 0.0.0.0 area 2
> >>network 105.1.28.2 0.0.0.0 area 3
> >>!
> >>router igrp 300
> >>redistribute ospf 100 metric 1 1000000 1 254 1500 route-map ospf
> >>passive-interface Serial1
> >>network 105.0.0.0
> >>!
> >>ip classless
> >>!
> >>!
> >>ip prefix-list igrp seq 5 permit 105.1.35.0/24 le 32
> >>ip prefix-list igrp seq 10 permit 105.1.33.0/24 le 32
> >>ip prefix-list igrp seq 15 permit 105.1.40.0/24 le 32
> >>ip prefix-list igrp seq 20 permit 105.1.21.0/24 le 32
> >>ip prefix-list igrp seq 25 permit 105.1.27.0/24 le 32
> >>ip prefix-list igrp seq 30 permit 105.1.31.0/24 le 32
> >>ip prefix-list igrp seq 35 permit 105.1.22.0/24 le 32
> >>ip prefix-list igrp seq 40 permit 105.1.23.0/24 le 32
> >>!
> >>ip prefix-list ospf seq 5 permit 105.1.25.0/24 le 32
> >>ip prefix-list ospf seq 10 permit 105.1.22.0/24 le 32
> >>ip prefix-list ospf seq 15 permit 105.1.20.0/24 le 32
> >>ip prefix-list ospf seq 20 permit 105.1.34.0/24 le 32
> >>ip prefix-list ospf seq 25 permit 105.1.28.0/24 le 32
> >>!
> >>!
> >>ipx router eigrp 100
> >>network 702
> >>network 205
> >>!
> >>!
> >>!
> >>route-map ospf permit 10
> >>match ip address prefix-list ospf
> >>!
> >>route-map igrp permit 10
> >>match ip address prefix-list igrp
> >>!
> >>bridge 1 protocol ieee
> >>bridge 1 route ip
> >>bridge 1 route ipx
> >>bridge 3 protocol ieee
> >>bridge 3 route ip
> >>bridge 3 route ipx
> >>alias exec ip sh ip route
> >>alias exec ipx sh ipx route
> >>alias exec int sh ip int brief
> >>alias exec xint sh ipx int brief
> >>!
> >>line con 0
> >>transport input none
> >>line aux 0
> >>line vty 0 4
> >>login
> >>!
> >>end
> >>
> >>
> >>
> >>r5#sh run
> >>Building configuration...
> >>
> >>Current configuration:
> >>!
> >>version 12.0
> >>service timestamps debug uptime
> >>service timestamps log uptime
> >>no service password-encryption
> >>!
> >>hostname r5
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>ip subnet-zero
> >>no ip domain-lookup
> >>!
> >>ipx routing 0005.0005.0005
> >>cns event-service server
> >>!
> >>!
> >>bridge irb
> >>!
> >>!
> >>!
> >>interface Ethernet0
> >>ip address 105.1.21.5 255.255.255.0
> >>no ip directed-broadcast
> >>no keepalive
> >>media-type 10BaseT
> >>!
> >>interface Ethernet1
> >>ip address 105.1.30.5 255.255.255.0
> >>no ip directed-broadcast
> >>media-type 10BaseT
> >>!
> >>interface Serial0
> >>ip address 105.1.27.5 255.255.255.0
> >>no ip directed-broadcast
> >>no ip mroute-cache
> >>no fair-queue
> >>!
> >>interface Serial1
> >>ip address 105.1.35.5 255.255.255.0
> >>no ip directed-broadcast
> >>clockrate 64000
> >>!
> >>interface Serial2
> >>ip address 105.1.40.5 255.255.255.0
> >>no ip directed-broadcast
> >>!
> >>interface Serial3
> >>no ip address
> >>no ip directed-broadcast
> >>encapsulation frame-relay
> >>clockrate 64000
> >>!
> >>interface Serial3.1 multipoint
> >>ip address 105.1.23.5 255.255.255.0
> >>no ip directed-broadcast
> >>frame-relay map ip 105.1.23.1 501 broadcast
> >>frame-relay map ip 105.1.23.2 502 broadcast
> >>!
> >>interface Serial3.2 point-to-point
> >>no ip directed-broadcast
> >>frame-relay interface-dlci 507
> >>bridge-group 2
> >>!
> >>interface TokenRing0
> >>no ip address
> >>no ip directed-broadcast
> >>shutdown
> >>!
> >>interface TokenRing1
> >>no ip address
> >>no ip directed-broadcast
> >>ring-speed 16
> >>bridge-group 3
> >>!
> >>interface BVI2
> >>ip address 105.1.29.5 255.255.255.0
> >>no ip directed-broadcast
> >>ipx network 705
> >>!
> >>interface BVI3
> >>ip address 105.1.31.5 255.255.255.0
> >>no ip directed-broadcast
> >>ipx network 205
> >>!
> >>!
> >>router igrp 300
> >>passive-interface Serial0
> >>network 105.0.0.0
> >>!
> >>router bgp 200
> >>neighbor 105.1.29.7 remote-as 200
> >>!
> >>ip classless
> >>no ip http server
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>!
> >>ipx router eigrp 100
> >>no redistribute connected
> >>network 705
> >>network 205
> >>!
> >>!
> >>!
> >>bridge 2 protocol ieee
> >>bridge 2 route ip
> >>bridge 2 route ipx
> >>bridge 3 protocol ieee
> >>bridge 3 route ip
> >>bridge 3 route ipx
> >>alias exec ip sh ip route
> >>alias exec ipx sh ipx route
> >>alias exec int sh ip int brief
> >>alias exec xint sh ipx int brief
> >>!
> >>line con 0
> >>transport input none
> >>line aux 0
> >>line vty 0 4
> >>login
> >>!
> >>end
> >>
> >>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:28 GMT-3