From: Richard Foltz (ccie2b@xxxxxxxxxx)
Date: Sun Oct 28 2001 - 16:09:27 GMT-3
passive interface command.
----- Original Message -----
From: "David Knot" <david_knot@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, October 28, 2001 12:41 PM
Subject: OSPF <-> EIGRP Redistribution
> Hi guys
>
> Can someone help with this OSPF <-> EIGRP
> redistribution lab exercise.
>
> Router B has 2 serial 0, serial 1 & Ethernet 0
> interfaces. The serials are running OSPF on them &
> they lead to OSPF IP cloud. The e0 is running EIGRP on
> it & they leads to EIGRP IP cloud. All IP subnet
> addresses have prefix of 180.99.X.X.
>
> The problem is when EIGRP is configured it grapes all
> 180.99.X.X interfaces (including the s0 & s1 IP
> subnets) & sends them out. The requirement is to have
> OSPF on 2 serials ONLY (this is easy since OSPF
> network command is granular) & EIGRP is to run on e0
> ONLY (this is where I need help since EIGRP network
> command is NOT granular). I tried a distribute list
> (distribute-list 99 out e0 with ACL denying the 2
> serial subnets). But this stops OSPF to EIGRP
> redistribution of these 2 subnets.
>
> Help please!
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:27 GMT-3