From: Charles Huang (CharlesNY2000@xxxxxxxxx)
Date: Sat Oct 27 2001 - 19:59:53 GMT-3
here is the debug dialer when I ping from r4 to r2
r4#
r4#debug dialer
Dial on demand events debugging is on
r4#ping 192.168.3.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.3.2, timeout is 2 seconds:
Oct 27 18:59:15: BR0/0 DDR: rotor dialout [priority]
Oct 27 18:59:15: BR0/0 DDR: Dialing cause ip (s=192.168.3.4, d=192.168.3.2)
Oct 27 18:59:15: BR0/0 DDR: Attempting to dial 8358661
Oct 27 18:59:16: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
Oct 27 18:59:16: BR0/0:1: interface must be fifo queue, force fifo
Oct 27 18:59:16: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di3.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 32/33/36 ms
r4#
Oct 27 18:59:16: BR0/0:1 DDR: dialer protocol up
Oct 27 18:59:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1,
changed state to up
Oct 27 18:59:22: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to
8358661 r2
r4#
r4#
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:26 GMT-3