From: Todd Veillette (tveillette@xxxxxxxx)
Date: Sat Oct 27 2001 - 19:50:09 GMT-3
Except for the "default hex devices" and you had better know what
I mean. If you input 40 you just put in 64 base 10.
-Todd
----- Original Message -----
From: "Richard Foltz" <ccie2b@rfoltz.com>
To: "Brian Lodwick" <xpranax@hotmail.com>; <ccielab@groupstudy.com>
Sent: Saturday, October 27, 2001 4:22 PM
Subject: Re: hex problems
> the 0x signifies the number as hex. i.e. if u just put 40 is that decimal
or
> hex? the assumption would be decimal because if it were hex it would be
> stated at 0x40.
>
>
> ----- Original Message -----
> From: "Brian Lodwick" <xpranax@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, October 27, 2001 2:47 PM
> Subject: hex problems
>
>
> > I have never understood this and it may be simple but I don't get it.
> > When dealing with hexadecimal numbers why are they written sometimes
like
> > 0x1244 and other times just 12fe ?
> > What the heck is with the 0x stuff?
> > What does that do when you put 0x at the front?
> > I just tried to enter a static cam entry into a Cat5000 and entered the
> mac
> > as 00b0d090bb27 but I got an error message saying:
> > "Route descriptor must be a hex value 0..0xffff"
> > I am confused. I am just a simple man and I don't understand this stuff,
> can
> > someone help me out here?
> >
> > >>>Brian
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:26 GMT-3