From: Hardesty, Scott X. (AIT) (sh1278@xxxxxxx)
Date: Fri Oct 26 2001 - 19:46:28 GMT-3
I am working on CCBootcamp lab 4 and trying to redistribute rip into BGP and
set the metric of the route =5. I tried accomplishing this task within the
redistribution command:
router bgp 1
red rip metric 5
I eventually accomplished the tack using a route-map but I would have
expected this to work correctly. When I did a sho ip bgp summ the metric
showed as 0. Without the metric being set in the redistribution statement
the metric field was empty. This leads me to believe the metric command is
doing something (obviously) but I was unable to get it to work properly. Am
I missing a step ? Has anyone used this command with success?
Scott Hardesty
Systems Engineer CCDP,CCNP
SBC DataComm
Phone: 410-871-2266
Fax: 410-840-4755
Cell: 410-733-3104
Confidential
This e-mail and any files transmitted with it are the property of SBC
Communications and/or its affiliates, are confidential, and are intended
solely for the use of the individual or entity to whom this e-mail is
addressed. If you are not one of the named recipient(s) or otherwise have
reason to believe that you have received this message in error, please
notify the sender at 410-871-2266 and delete this message immediately from
your computer. Any other use, retention, dissemination forwarding, printing
or copying of this e-mail is strictly prohibited.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:26 GMT-3