From: @ Home NetMail (@)
Date: Fri Oct 26 2001 - 10:44:51 GMT-3
If you can perform all these scenarios cold, it will be more than
sufficient. Something else to keep in mind is the filtering, if you have a
DLSW+ I'm betting there will be a filter of some type or another.
-Todd
----- Original Message -----
From: Jaspreet Bhatia <jasbhati@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, October 25, 2001 2:33 PM
Subject: DLSW+ Topics
> Folks,
> I have compiled a list of topics that are needed to
be
> covered for DLSW+ .Please let me know if these are sufficient ...
>
> 1) DLSW+ between two token-ring LANs with TCP encapsulation
> 2) DLSW+ between two token-ring LANs with FST encapsulation
> 3) DLSW+ between Token ring and Ethernet
> 4) DLSW+ between Ethernet LANs
> 5) Ring-lists
> 6) DLSW+ Backup peer using an ISDN DDR circuit
> 7) Configuring DLSW+ peer groups and Border peers
> 8) DLSW+ dial on demand over ISDN
> 9) DLSW+ Ethernet redundancy
> 10) DLSW+ with local and remote SR/TLB
> 11) DLSW+ with NAT
> 12) Adjusting LLC2 timers
> 13) DLSW+ SAP/MAC filtering
>
>
> Can anyone add or subtract to this list ? I have used CASLOW and also the
> Networkers 2001 CCIE Power Session to come up with this List .....
>
> Thanks
>
> Jaspreet
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:25 GMT-3