From: Fear, Russell H (Russell.Fear@xxxxxxxxxxxxxxx)
Date: Tue Oct 23 2001 - 09:47:05 GMT-3
Can anyone in the group clarify something for me please. When I use ip ospf
demand-circuit on a dialer interface, 7 out of 10 times it works fine with
hellos being supressed, the rest of the time it brings up the line
continually for hellos. I have debugged in these cases and it is not an lsa
but a hello bringing it up. I realise I can stop this with an access list
but is the command badly bugged or is there something I'm missing ?
Also if anyone has done ccbootcamp lab 20, how do you get the ISDN to
back-up a dlci ? I see in the solution that they have just placed the
interface in back-up mode but this doesn't seem to work when I down the
interface.
Any help would be appreciated.
TIA
Russell
* 700 2201 Internal
* +44 ( 0 ) 870 238 2201 External
* russell.fear@capgemini.co.uk
*******************************************************************************
*************
" This message contains information that may be privileged or confidential and
is the property of the Cap Gemini Ernst & Young Group. It is intended only for
the person to whom it is addressed. If you are not the intended recipient, you
are not authorized to read, print, retain, copy, disseminate, distribute, or us
e
this message or any part thereof. If you receive this message in error, please
notify the sender immediately and delete all copies of this message ".
*******************************************************************************
*************
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3