NSSA P-Bit

From: Kyaw Khine (kkhine@xxxxxxxxxxxx)
Date: Fri Oct 19 2001 - 13:03:22 GMT-3

• Next message: Frank Kim: "Re: LAB Schedule"
• Previous message: Timothy Gray: "LAB Schedule"
• Next in thread: Jim Brown: "RE: NSSA P-Bit"
• Maybe reply: Jim Brown: "RE: NSSA P-Bit"
• Maybe reply: Kyaw Khine: "RE: NSSA P-Bit"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi Group,

Reference to http://www.cisco.com/warp/customer/104/nssa.html
<http://www.cisco.com/warp/customer/104/nssa.html>
OSPF NSSA type-7 LSAs are converted to type-5 LSA when P Bit is on i.e P Bit
= 1.
If NSSA ASBR is also NSSA ABR, P Bit is set to zero.
Is there any knob that I can turn so that I can set P Bit to 1 while NSSA
ASBR and NSSA ABR are the same router?

Thanks ..

- Joe

• Next message: Frank Kim: "Re: LAB Schedule"
• Previous message: Timothy Gray: "LAB Schedule"
• Next in thread: Jim Brown: "RE: NSSA P-Bit"
• Maybe reply: Jim Brown: "RE: NSSA P-Bit"
• Maybe reply: Kyaw Khine: "RE: NSSA P-Bit"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3