From: Ademola Osindero (osindero@xxxxxxxxxxxxxxxxx)
Date: Fri Oct 19 2001 - 11:38:46 GMT-3
I guess running config can only be shown in the privilege mode.
At 03:32 PM 10/19/2001 +0100, Fear, Russell H wrote:
>Can someone in the group help me please ?
>
>I am trying to set up a router ( terminal server ) so that a user telneting
>in can issue the show command and see the hosts defined without going into
>enable mode and being able to screw up the loopback address or anything
>else.
>
>I've been mucking around with privilelege exec level 0 show running-config
>but, although the command is available for non-privileged mode, it doesn't
>show the running config.
>
>Can someone tell me what I'm missing or should I be using another command ?
>
>TIA
>
>Russell
>
>
>* 700 2201 Internal
>* +44 ( 0 ) 870 238 2201 External
>* russell.fear@capgemini.co.uk
>
>
>
>
>
>******************************************************************************
**************
>" This message contains information that may be privileged or confidential
>and
>is the property of the Cap Gemini Ernst & Young Group. It is intended only
>for
>the person to whom it is addressed. If you are not the intended recipient,
>you
>are not authorized to read, print, retain, copy, disseminate, distribute,
>or use
>this message or any part thereof. If you receive this message in error,
>please
>notify the sender immediately and delete all copies of this message ".
>******************************************************************************
**************
Osindero Ademola
Schlumberger Network Solutions
Tel: 234 1 261 0446 Ext 3227
Fax 234 1 262 1034
email:osindero@lagos.sns.slb.com
CONFIDENTIAL & PRIVILEGED COMMUNICATION
The information contained in this message is privileged, confidential, and
protected from disclosure. This message is intended for the individual or
entity addressed herein. If you are not the intended recipient, please do
not read, copy, use or disclose this communication to others; also please
notify the sender by replying to this message, and then delete it from your
system. The sender totally disclaims, and will not accept, any
responsibility or liability for the unauthorized use, or the consequences
of any unauthorized use, of this communication or message.
Thank you
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3