From: Jason Gardiner (gardiner@xxxxxxxxxx)
Date: Thu Oct 18 2001 - 23:13:54 GMT-3
Did you try setting the network on R1's Lo0 to point-to-point?
Thanks,
Jason Gardiner
Supervisor, Engineering Services
Sprint E|Solutions
"You can swim all day in the Sea of Knowledge and
still come out completely dry. Most people do."
- Norton Juster
On Fri, 19 Oct 2001, Michael Wong wrote:
> Guru Schwarmys ....
>
> I've got a redistribution problem and need help .... here is the scenario.
>
> Let's say I've got 3 routers, the links between the routers are not important
, lets say they're just HDLC.
>
> Loop0:15.15.1.1/24 Loop0:15.15.2.2/24
> | |
> | |
> R1--------------------------R2
> |
> |
> R3
> |
> |
> Loop0:15.15.3.3/24
>
> OK, so were got IS-IS running on the loop0 on R1 and R2 and the link between
R1 and R2. We've got OSPF running on the link between R1 and R3 and loop0 on R3
.
>
> On R1 I want to perform redistribution from IS-IS to OSPF. When I do this, R3
only sees R2's loopback in it's routing table and "not" R1's loopback. My ques
tion ... is this because R1 sees it's loopback as connected (even though it's i
n IS-IS) and therefore does no redistribute into OSPF. The only way I get R1's
loopback into R3 is by redistributing connected.
>
> Is there another way around this or is this how you do it ???
>
> TIA .... MW :)
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3