From: Christopher M. Heffner (cheffner@xxxxxxxxxxxxxxxxxx)
Date: Thu Oct 18 2001 - 21:49:08 GMT-3
Annu:
First try resitting the flash simm modules. This will work
better than 50% of the time.
Have you recently upgraded the flash modules inside the router or done
some work in the router?
Chris "The Bulldog" Heffner
Strategic Network Solutions, Inc.
IMCR Course Director
Certified Cisco Systems Instructor
CCIE, CCSI, CCNP, CCDP, CCNA, CCDA, MCT, MCSE, MCNI, MCNE, CLI, PCLP,
CTT, ASE, A+
cheffner@certified-labs.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Annu
Sent: Thursday, October 18, 2001 3:34 PM
To: ccielab@groupstudy.com
Subject: 2511 Booting problems ?
Group,
I am haveing a 2511 with 11.2 version software. It was
working normal , till all of a sudden it has started
giving problems. When i boot the router it gives me
the following error.
Now it boots and goes into the boot mode.This does not
happen always ....may be out of 10 reloads 4 times its
ok...and on all other occassions it gives this error.
%Error: System flash bank 1 chip 0 unknown, chip id
0x2D2F (reversed = 0xB4F4)
%Error: System flash initialization failed
Is it to say that the flash itself is bad ? What is
the next step to solve this problem and get it
working.
Please let me know.Thanks in advance for ur time and
answer(s).
Annu.
=====
Thanks in advance for ur time and replies.
Annu.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3