From: Lionel Florit (lflorit@xxxxxxxxx)
Date: Tue Oct 16 2001 - 14:50:08 GMT-3
My config might help (R7 is the local router)....
R7-frame#Sho ip ro
C 204.100.100.144/28 is directly connected, Serial5
O 204.100.100.145/32 [110/64] via 204.100.100.145, 01:02:29, Serial5
<--- entry I want 2 get rid of
interface Serial5
ip address 204.100.100.146 255.255.255.240
encapsulation frame-relay
ip ospf network point-to-multipoint
frame-relay interface-dlci 507
remote router config
interface Serial0.2 point-to-point
ip address 204.100.100.145 255.255.255.240
no ip directed-broadcast
ip ospf network point-to-multipoint
frame-relay interface-dlci 507
At 01:39 PM 10/16/2001 -0400, Juan Alcaide wrote:
>Fame relay does not install /32 (???)....
>
>
>
>On Tue, 16 Oct 2001, Lionel Florit wrote:
>
> > sorry, I should have mentioned that I'm learning the /32 address of the
> > remote peer from OSPF...
> >
> > >Date: Tue, 16 Oct 2001 10:24:13 -0700
> > >To: ccielab@groupstudy.com
> > >From: Lionel Florit <lflorit@cisco.com>
> > >Subject: /32 on frame relay
> > >
> > >Hi there,
> > >
> > >I'm trying to get rid of the /32 entry generated in a p2p frame relay
> > >link. I'm looking for the equivalent of "no peer neighbor-route" in PPP.
> > >Any idea?
> > >
> > >thanks
> > >Lionel
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:20 GMT-3