From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Tue Oct 16 2001 - 02:28:37 GMT-3
I think that you are confusing physical DTE/DCE with frame relay DTE/DCE
which are different concepts. It is possible to run back to back F/R with
two serial routers in the IOS. However, it sounds like you are talking about
something else.
Can you please clarify what you are attempting?
Regards,
Jason Sinclair
Network Support Manager
POWERTEL Limited
Level 11, 55 Clarence Street, SYDNEY
Phone: 61-2-8264-3820
Fax: 61-2-9279-2604
Mobile: 0416 105 858
jasons@powertel.net.au
-----Original Message-----
From: michale_lee50@hotmail.com
[mailto:michael_lee50@hotmail.com]
Sent: Tuesday, 16 October 2001 15:04
To: ccielab@groupstudy.com
Subject: hybrid DTE/DCE frame switching ?
Hi All,
What is with this ? I have a frame switch and am trying to
get it going with a
dte to cde route, always did it with dce but just playing
around tonight and
just can't figure it out. ( should I not be able to set the
clock on my edge
router and have it work the same ?
http://www.cisco.com/univercd/cc/td/doc/product/software/ios102/accscg/76827
.
htm
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:20 GMT-3