From: Brian Lodwick (xpranax@xxxxxxxxxxx)
Date: Mon Oct 15 2001 - 14:49:23 GMT-3
I'm sorry looks like I jumped a little too fast there. I guess I should've
made sure you trying to bridge IPX from r5 to r7?
If yes, my response should be correct. Also I believe you will run into an
issue bridging between the Ethernet and Token-Ring networks.
Won't you have to configure SR/TLB on r1 since you are trying to bridge from
Ethernet to Token-Ring?
Also I believe you will want to assure the max MTU all around is 1500 so
that you don't get an oversized frame on the Ethernet segment from the
Token-Ring segment?
>>>Brian
>From: perkinsr@WellsFargo.COM
>Reply-To: perkinsr@WellsFargo.COM
>To: ccielab@groupstudy.com
>Subject: IRB issues from lab 8
>Date: Mon, 15 Oct 2001 10:21:01 -0700
>
>I cannot get IRB to work. Here is the IRB scenario from lab 8, the only
>differance is there is token instead of ether between R1 and R7.
>
>
> BVI1
> |
>-----R5----------------------R1----------------------R7--t5/3
> s0 s1 to0 t5/0
>
>
>
>This is tough, I can't ipx ping from R7 to R5, but routing info is passed.
>R7 all routes beyond R5, R7 is a stub, but net 701 (off t5/3) is visible
>from R5. Pings will not work though. I was thinking frame type
>concic/non-concical type problems. I tried making the MAC of t5/3 0.0.ff
>so
>that it would be the same either way, but that didn't work. The BVI1 on R5
>is set to SAP frame type just like the token interface on R7.
>
>Help....
>
>
>
>configs:
>R5
>ipx routing 0000.0000.0005
>!
>interface Serial1
> ip address 137.20.25.1 255.255.255.0
> no ip directed-broadcast
> ip accounting output-packets
> no logging event subif-link-status
> bridge-group 1
>!
>interface BVI1
> no ip address
> no logging event subif-link-status
> ipx encapsulation SAP
> ipx network 700
>!
>ipx router eigrp 10
> network 5130
> network 5004
> network 695
>!
>!
>ipx router rip
> no network 5130
> no network 5004
> no network 695
>!
>bridge irb
>bridge 1 protocol ieee
> bridge 1 route ip
> bridge 1 route ipx
> no bridge 1 bridge ip
>
>R1
>!
>interface Serial0
> ip address 137.20.25.2 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> clockrate 64000
> bridge-group 1
>!
>interface TokenRing0
> ip address 137.20.10.1 255.255.255.0
> no ip route-cache
> no ip mroute-cache
> ring-speed 16
> bridge-group 1
>!
>bridge 1 protocol ieee
>
>R7
>ipx routing 0000.0000.0007
>!
>interface TokenRing5/0
> ip address 5.5.5.5 255.255.255.0 secondary
> ip address 137.20.10.70 255.255.255.0
> ipx network 700
> ring-speed 16
>!
>interface TokenRing5/3
> ip address 172.168.70.1 255.255.255.0
> ipx network 701
> ring-speed 16
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:19 GMT-3