From: Brian Hescock (bhescock@xxxxxxxxx)
Date: Sun Oct 14 2001 - 20:16:27 GMT-3
Try the following link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios100/eigrp/41217.htm
If still unsure, turn it off on each interface type (to make sure it
applies to each interface type equally) and do a show run. Then turn it
back on and do a show run.
Brian
ohanusi anthony wrote:
> I want to know if there is a command to see this.
>
> sho ipx interface will not show me it will only show the sap timer
> ,filter etc
>
> Regards
>
>
> At 09:32 AM 10/14/2001 -1000, Frank B wrote:
>
>> Anthony,
>> My first tip would be ALWAYS check the command reference for
>> questions
>> regarding the default for any ios command. Most often, almost
>> always, the
>> default doesn't show up in the config. Also, there's often several
>> other
>> interesting tid-bits of info you may find useful.
>> -------------------
>> 1) ipx sap-incremental
>>
>> Defaults
>>
>> Enabled on serial interfaces
>>
>> Disabled on LAN media (Ethernet, Token Ring, FDDI)
>>
>> -------------------
>> 2) ipx split-horizon eigrp
>>
>> defaults
>>
>> enabled
>>
>> -------------------
>>
>> If you configure other than the default your command will (read shoud ;)
>> show up in the config. Aloha, Frank
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> ohanusi anthony
>> Sent: Sunday, October 14, 2001 4:43 PM
>> To: ccielab@groupstudy.com
>> Subject: split horizon
>>
>>
>> Hi all ,
>> is there a way to know if ipx sap-incremental split horizon is
>> disable
>> or enable on an interface.
>>
>> show the light
>>
>> Ohanusi Anthony CCNA,CCNP,CCIE Written.
>> WAN Engineer
>>
>> Network Solution, A Schlumberger Company
>> Email : <ohanusi@lagos.sns.slb.com>
>> Phone : 234-1-2610446 EXT 3230
>> Fax : 234-1-2621034
>> Learn to qualify your statement
>
> Ohanusi Anthony CCNA,CCNP,CCIE Written.
> WAN Engineer
>
> Network Solution, A Schlumberger Company
> Email : <ohanusi@lagos.sns.slb.com>
> Phone : 234-1-2610446 EXT 3230
> Fax : 234-1-2621034
> Learn to qualify your statement
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:18 GMT-3