From: Andrew Maskell (amaskell@xxxxxxxxx)
Date: Sat Oct 13 2001 - 23:00:09 GMT-3
Hi Hendre - try this:
Understanding Service Access Point Access Control Lists
http://www.cisco.com/warp/public/698/acl200.html
-Andrew
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Hendre Kleynhans
> Sent: Saturday, October 13, 2001 3:40 PM
> To: 'ccielab@groupstudy.com'
> Subject: netbios access-list bytes
>
>
> Does anybody know how to use the "netbios access-list bytes" access-list
> witch you can use for filtering in DLSW and SRB?
>
> The info on the CD is:
>
> netbios access-list bytes name {permit | deny} offset pattern
>
> offset: Decimal number indicating the number of bytes into the
> packet where
> the byte comparison should begin. An offset of zero points to the very
> beginning of the NetBIOS header. Therefore, the NetBIOS delimiter string
> (0xFFEF), for example, begins at offset 2.
>
> pattern: Hexadecimal string of digits representing a byte pattern
>
> I would be grateful for any help....
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the system manager.
>
> This footnote also confirms that this email message has been swept by
> MIMEsweeper for the presence of computer viruses.
>
> www.mimesweeper.com
> **********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:18 GMT-3