From: Paul Young (tsungdapaulyoung@xxxxxxxxx)
Date: Fri Oct 12 2001 - 19:47:15 GMT-3
Hi Dave:
Try this URL see if it helps:
http://www.cisco.com/warp/public/471/mod-aux-exec.html
--- David Siwula <DSiwula@ceira.com> wrote:
> Good Friday....
> I am connected to a cat 6509 via telnet and am
> trying to establish a
> reverse telnet session to a usr modem connected to
> the console port of
> the supervisor engine. I do a show line and the
> console appears to be
> line 0. I enter telnet 1.1.1.1 (or ip addr of any
> vlan interface) 2000
> and it keeps saying line refused by remote host.
> Normally with term
> server you can just clear the line and it works like
> a charm. Is there
> some sort of limitation in doing this with the
> console port? I was
> thinking I should be able to do this to connect to
> the modem if I need
> to change the at string command to modify speed,
> flow control, etc.
> remotely without intervention. Thanks for the
> help.......
> Dave
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:18 GMT-3