From: Tony Olzak (tolzak@xxxxxxxxxxx)
Date: Fri Oct 12 2001 - 13:50:11 GMT-3
You should be able to contact your local Cisco SE and find out this kind
of information. You might also find the info if you just did some
research on CCO. I (and many others I'm sure) would appreciate if we
didn't post off-topic messages to this mailing list. If it's off-topic,
it doesn't belong here.
Tony Olzak, CCIE #6689
ComWavz
tolzak@comwavz.com
-----Original Message-----
From: Nicholas Jaksec [mailto:jaksec@lucent.com]
Sent: Friday, October 12, 2001 12:15 PM
To: CCIE
Subject: Voice & Data using a 1750
Can anybody shed some light on how to configure a 1750 with an external
CSU/DSU to support 4- channels for data and 20 channles for voice across
a
full T-1. The customer has a 1750 with a integrated CSU/DSU serial card
but
Cisco says this card cannot support both voice and data at the same
time,
they would have to upgrade to a 2600 series with a Channelized T-1
module.
The customer doesn't want to spend the money and was told that an
External
CSU/DSU attached to the 1750 with do both Voice and Data.
What kind of CSU/DSU can support this ??? Secondly how to configure
this.
Any response would be appreciated, thanks !!
********************************************
Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
Network Systems Engineer
Lucent Worldwide Services
One North Shore Center
12 Federal St. Suite 420
Pittsburgh, Pa 15212
Office: 412-330-6336 Fax: 412-323-7665
Pager: 1-800-467-1467
Email: jaksec@lucent.com
********************************************
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:18 GMT-3