From: Jeremy (jeremy19@xxxxxxxx)
Date: Fri Oct 12 2001 - 10:41:10 GMT-3
Excuse me, I don't have immediate access to a router, but try the following
commands, please:
aaa authentication login no_tacacs local enable
line 1 16
login authentication no_tacacs
Let me know if this works.
-Jeremy
----- Original Message -----
From: "Jaspreet Bhatia" <jasbhati@cisco.com>
To: <SFeldberg@edeltacom.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, October 11, 2001 8:31 AM
Subject: Re: TACACS+ Question
> I already tried that .Does not work ...
>
> At 11:11 AM 10/11/2001 -0400, SFeldberg@edeltacom.com wrote:
>
> >!
> >Line 1 16
> >no login authentication
> >!
> >
> >Steve
> >
> >
> >
> >
> > Jaspreet
> >
> > Bhatia To: ccielab@groupstudy.com
> >
> > <jasbhati@cis cc:
> >
> > co.com> Subject: TACACS+
> > Question
> > Sent
> > by:
> > nobody@groups
> >
> > tudy.com
> >
> >
> >
> >
> >
> > 10/11/2001
> >
> > 11:08
> > AM
> > Please
> >
> > respond
> > to
> > Jaspreet
> >
> > Bhatia
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >Folks,
> >
> > I have a 2511 acting as a terminal server .I have
> >enabled it for TACACS+ authentication . It is working fine . The problem
is
> >
> >that the TACACS+ configuration has been applied to the sixteen lines
also
> >. Is there any way I can leave TACACS+ enable on the terminal server
itself
> >
> >but disable it from the individual lines . Any help would be appreciated
.
> >
> >Thanks
> >
> >Jaspreet
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:17 GMT-3