pbx-e&m-3662-pots

From: Y1700@xxxxxxxxxxxx
Date: Thu Oct 11 2001 - 08:31:44 GMT-3

• Next message: Todd Veillette: "Fw: 1-day lab format"
• Previous message: Khalid Nafie: "Metric-type internal"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hello there

Network is following.

pbx - p32t - ---E1----3662-----phone1
                                   -----phone2

this is a 3662 configuration.

when I try to connect the phone1 to phone2, after ringing successfully line is
busy state as soon as I hang up a phone2.

I don't know why.

Please let me excape from this headache situation.

Thanks.

==== configuration ======

!
!
controller E1 2/0
!
controller E1 2/1
 framing NO-CRC4
 clock source line primary
 ds0-group 0 timeslots 1 type e&m-melcas-immed
 ds0-group 1 timeslots 2 type e&m-melcas-immed
 ds0-group 2 timeslots 3 type e&m-melcas-immed

voice-port 2/1:0
 define Tx-bits idle 1001
 define Tx-bits seize 0001
 define Rx-bits idle 1001
 define Rx-bits seize 0001
!
voice-port 2/1:1
 define Tx-bits idle 1001
 define Tx-bits seize 0001
 define Rx-bits idle 1001
 define Rx-bits seize 0001
!
voice-port 2/1:2
 define Tx-bits idle 1001
 define Tx-bits seize 0001
 define Rx-bits idle 1001
 define Rx-bits seize 0001
 connection trunk 7700
!
voice-port 5/0/0
!
voice-port 5/0/1
!
dial-peer cor custom
!
!
!
dial-peer voice 1 pots
 destination-pattern 7700
 port 5/0/0
!
dial-peer voice 2 pots
 destination-pattern 7800
 port 5/0/1
!
dial-peer voice 3 pots
 destination-pattern 10
 port 2/1:0
!

• Next message: Todd Veillette: "Fw: 1-day lab format"
• Previous message: Khalid Nafie: "Metric-type internal"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:16 GMT-3