From: Michael Wong (Michael.Wong@xxxxxxxxxx)
Date: Sat Oct 06 2001 - 21:51:12 GMT-3
try setting the community on the default to "no export" - this will also do the
same job. The down side is that every router (including the ones in AS100) hav
e to be configured to send the community ..... but it works.
MW :)
-----Original Message-----
From: Jim Brown [mailto:Jim.Brown@CaseLogic.com]
Sent: Tuesday, 2 October 2001 9:05 am
To: 'Knellinger, Mark'; ccielab@groupstudy.com
Subject: RE: Hutnik's CCIE practice labs Case Study1 Question?
Couldn't you use a neighbor filter list if this is the only route that
originates from that AS? There are several ways to skin a cat.
-----Original Message-----
From: Knellinger, Mark [mailto:KnelliMS@tvratings.com]
Sent: Monday, October 01, 2001 4:53 PM
To: ccielab@groupstudy.com
Subject: Hutnik's CCIE practice labs Case Study1 Question?
All,
On Hutnik's BGP case study, task #42 asks to not advertise the default
outside of AS100. The answer key uses a neighbor filter-list command. Isn't
that only for AS path filtering? Shouldn't this be a neighbor
distribute-list? Filtering the default route of 0.0.0.0?
Thanks,
Mark Knellinger
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
Having trouble posting? Read:
http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:14 GMT-3