From: Richard Gallagher (rgallagh@xxxxxxxxx)
Date: Tue Oct 02 2001 - 13:04:34 GMT-3
Carole,
I believe that NAT is the exception to the rule, even when fast switching and
you enable the debug you will see ALL packets being nat'd, so this will not
help. But as far as I know NAT is swithced in the fast path with later versions
of IOS.
Rich
CCIE #7211
On Oct 2, 3:51pm, Carole Warner Reece chatted about:
> Subject:Re: NAT
> Tom -
>
> Set up a test config & try 'debug ip nat'.
>
> I think you will see that the first packet in the stream is process
> switched, and then the rest of packets use the fast switching path.
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121sup/121deb
ug/dbdipdrp.htm#xtocid2143829
>
> Carole
>
> ------------------------------------------------------------------------
> Carole Warner Reece, CCIE #5168
> Mentor Technologies
> http://www.mentortech.com
> ------------------------------------------------------------------------
>
> At 08:02 AM 10/2/01 -0500, tom cheung wrote:
> >Does anybody know whether or not packets are process switched on an
> >interface with NAT turned on?
> >
> >TIA
> **Please read:http://www.groupstudy.com/list/posting.html
>-- End of waffle from Carole Warner Reece
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:11 GMT-3