From: Raji Mohan (raji@xxxxxxxxxxxxxxxx)
Date: Tue Oct 02 2001 - 08:09:53 GMT-3
NLSP requires an internal network number. Try adding that on both routers
and see if it works.
/raji
On Mon, 1 Oct 2001, garry baker wrote:
> Guys,
>
> I have configured nlsp between two routers via
> ethernet. the adjacency does not come up and i get
> encapsulation error messages from one router. I have
> seen this on serial interfaces and a reboot has fixed
> everything. I haven't seen this before and i can't see
> anything in the archives. the configs are very basic
> but they are not playing. below is all that i have
> configured.
>
> r5
> interface Ethernet0
> mac-address 0005.0005.0005
> ip address 10.1.1.1 255.255.255.0
> ipx network 15150015
> ipx nlsp 15 enable
> !
> ipx router nlsp 15
> area-address 15150000 FFFF0000
>
> r1
>
> interface Ethernet0
> mac-address 0001.0001.0001
> ip address 10.1.1.2 255.255.255.0
> ipx network 15150015
> ipx nlsp 15 enable
> !
> ipx router nlsp 15
> area-address 15150000 FFFF0000
>
> here is the error message:
> NLSP-Adj: Encapsulation failed for L1 LAN IIH on
> Ethernet0
>
> r5 is receiving hello packets but is not initiating
> them for some reason.
>
>
> Garry
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:11 GMT-3