From: Charles Huang (charlesny2000@xxxxxxxxx)
Date: Mon Oct 01 2001 - 13:36:41 GMT-3
I tried swapping the cables too, but same thing
happens. Cables work fine on the other port.
Thanks
Charles
--- David Siwula <DSiwula@ceira.com> wrote:
> Possibly crappy cables? Sometimes cables act up. I
> had this problem
> until we actually bought the cisco cables....
> Dave
>
> -----Original Message-----
> From: Charles Huang [mailto:charlesny2000@yahoo.com]
> Sent: Monday, October 01, 2001 9:30 AM
> To: ccielab@groupstudy.com
> Subject: OT: Problem with NP-2T on Cisco 4000 router
>
>
> Hi,
>
> I have a Cisco 4000 router with 4M flash/16+4 RAM
> with
> two * NP-4T cards. Serial 2 & Serial 6 ( 3rd port
> on
> each of the card ) on this router works fine for
> about
> 20-30 minutes. after that the link/line protocol
> bounce up and down, then it goes down completely. I
> tried both Frame-Relay and HDLC encapsulation as
> well
> as lowing the clock rate to 56000 and 64000.
>
> Has anyone cames across same or simular kind of
> problem ?
> The router is running 12.0(15) IP/IPX/AT/DEC Plus
> feature set.
>
> Any help/suggestions will be appricated
>
> Thanks in advance
>
> Charles
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:10 GMT-3