From: David Siwula (DSiwula@xxxxxxxxx)
Date: Mon Oct 01 2001 - 13:35:26 GMT-3
Possibly crappy cables? Sometimes cables act up. I had this problem
until we actually bought the cisco cables....
Dave
-----Original Message-----
From: Charles Huang [mailto:charlesny2000@yahoo.com]
Sent: Monday, October 01, 2001 9:30 AM
To: ccielab@groupstudy.com
Subject: OT: Problem with NP-2T on Cisco 4000 router
Hi,
I have a Cisco 4000 router with 4M flash/16+4 RAM with
two * NP-4T cards. Serial 2 & Serial 6 ( 3rd port on
each of the card ) on this router works fine for about
20-30 minutes. after that the link/line protocol
bounce up and down, then it goes down completely. I
tried both Frame-Relay and HDLC encapsulation as well
as lowing the clock rate to 56000 and 64000.
Has anyone cames across same or simular kind of
problem ?
The router is running 12.0(15) IP/IPX/AT/DEC Plus
feature set.
Any help/suggestions will be appricated
Thanks in advance
Charles
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:10 GMT-3