From: kym blair (kymblair@xxxxxxxxxxx)
Date: Mon Oct 01 2001 - 03:36:58 GMT-3
Ravi,
In addition to "ppp multilink", you have to program *both* spids in order to
be able to dial the second line.
Kym
>From: "Ravi" <s_ravichandran@hotmail.com>
>Reply-To: "Ravi" <s_ravichandran@hotmail.com>
>To: <ccielab@groupstudy.com>
>Subject: ppp multilink question
>Date: Mon, 1 Oct 2001 00:25:21 -0400
>
>Hi,
>
>I am working on a scenario where I have to set dialer load-threshold 70%
>outbound. After doing this, how to find out this works. And I assume that
>once it brings up the second channel (that is after the 70% ) it will
>equally send the traffic on each channel. Or do we have to configure some
>other parameter.
>Regards,
>Ravi
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:10 GMT-3