From: Tim Fletcher (tim@xxxxxxxxxxxxxx)
Date: Mon Sep 17 2001 - 14:24:39 GMT-3
Yes, "sh vlan" included below. The problem is that the RSM does not seem to
recognize the type parameter
Router(config)#int vlan 100 ?
<cr>
Does anybody have a working config? If so, please let me know what versions
you are using.
Thanks.
-Tim
Output from "sh vlan" on sup:
VLAN Name Status IfIndex Mod/Ports, Vlans
---- -------------------------------- --------- -------
------------------------
1 default active 5 3/3-6,3/8-24
2 VLAN0002 active 11 3/1,3/7
3 VLAN0003 active 12 3/2
4 VLAN0004 active 59
10 VLAN0010 active 61 5/1-2
100 VLAN0100 active 60 10
1002 fddi-default active 6
1003 trcrf-default active 9 5/3-16
1004 fddinet-default active 7
1005 trbrf-default active 8 1003
VLAN Type SAID MTU Parent RingNo BrdgNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ ------ ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
10 trcrf 100010 4472 100 0xa - - srb 0 0
100 trbrf 100100 4472 - - 0x1 ibm - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 trcrf 101003 4472 1005 0xccc - - srb 0 0
1004 fdnet 101004 1500 - - - - - 0 0
1005 trbrf 101005 4472 - - 0xf ibm - 0 0
VLAN DynCreated RSPAN
---- ---------- --------
1 static disabled
2 static disabled
3 static disabled
4 static disabled
10 static disabled
100 static disabled
1002 static disabled
1003 static disabled
1004 static disabled
1005 static disabled
VLAN AREHops STEHops Backup CRF 1q VLAN
---- ------- ------- ---------- -------
10 7 7 off
1003 7 7 off
At 09:20 PM 9/16/01 -0500, Jeff K. wrote:
>Have you configured VLAN 100 on the switch first?
>
>----- Original Message -----
>From: "Tim Fletcher" <tim@fletchmail.net>
>To: <ccielab@groupstudy.com>
>Sent: Sunday, September 16, 2001 7:28 PM
>Subject: Cat 5000 w/RSM & Token Ring
>
>
> > Hi all,
> >
> > I have a Cat 5505 with RSM and WS-X5030 token ring card. The problem is I
>can't get Token Ring vlans to work. All the documentation only seems to
>address Ethernet vlans. I finally found some information at
>http://www.cisco.com/univercd/cc/td/doc/product/lan/trsrb2/scen6.htm which
>uses the syntax "interface vlan100 type trbrf", but my router won't accept
>that.
> >
> > Router(config)#int vlan 100 type trbrf
> > ^
> > % Invalid input detected at '^' marker.
> >
> > Any ideas?
> >
> > -Tim
> >
> > Output from "sh ver" on RSM:
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) C5RSM Software (C5RSM-DSV56I-M), Version 12.0(19), RELEASE
>SOFTWARE (fc1)
> > Copyright (c) 1986-2001 by cisco Systems, Inc.
> > Compiled Tue 07-Aug-01 03:37 by nmasa
> > Image text-base: 0x60010930, data-base: 0x60CF0000
> >
> > ROM: System Bootstrap, Version 11.2(17523) [mohsen 102], INTERIM SOFTWARE
> > BOOTFLASH: C5RSM Software (C5RSM-BOOT-M), Version 12.0(17), RELEASE
>SOFTWARE (fc1)
> >
> > Router uptime is 19 minutes
> > System restarted by reload
> > System image file is "slot0:c5rsm-dsv56i-mz.120-19"
> >
> > cisco RSP2 (R4700) processor with 65536K/2072K bytes of memory.
> > R4700 processor, Implementation 33, Revision 1.0
> > Last reset from power-on
> > G.703/E1 software, Version 1.0.
> > G.703/JT2 software, Version 1.0.
> > X.25 software, Version 3.0.0.
> > Bridging software.
> > 1 C5IP controller (2 Vlan).
> > 2 Virtual Ethernet/IEEE 802.3 interface(s)
> > 123K bytes of non-volatile configuration memory.
> >
> > 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> > 20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
> > 8192K bytes of Flash internal SIMM (Sector size 256K).
> > Configuration register is 0x2102
> >
> >
> >
> > Output from "sh mod" on Cat:
> >
> > Mod Slot Ports Module-Type Model Sub Status
> > --- ---- ----- ------------------------- ------------------- --- --------
> > 1 1 2 1000BaseSX Supervisor WS-X5530 yes ok
> > 2 2 1 Route Switch WS-X5302 no ok
> > 3 3 24 10BaseT Ethernet WS-X5013 no ok
> > 5 5 16 Token Ring WS-X5030 no ok
> >
> > Mod Module-Name Serial-Num
> > --- -------------------- --------------------
> > 1 00010823838
> > 2 00006776074
> > 3 00006579490
> > 5 00007380986
> >
> > Mod MAC-Address(es) Hw Fw Sw
> > --- -------------------------------------- ------ ---------- -------------
>----
> > 1 00-10-0b-1f-34-00 to 00-10-0b-1f-37-ff 2.3 5.1(2) 6.3(1)
> > 2 00-e0-1e-91-be-5c to 00-e0-1e-91-be-5d 4.5 20.22 12.0(19)
> > 3 00-10-54-80-4f-c8 to 00-10-54-80-4f-df 1.0 1.1 6.3(1)
> > 5 00:05:77:05:91:15 to 00:05:77:05:91:25 1.0 3.1(2) 3.3(3)
> >
> > Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
> > --- -------- --------- ---------- ------
> > 1 NFFC WS-F5521 0008933672 1.0
> > 1 uplink WS-U5534 0016366617 1.2
> > **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:19 GMT-3