From: Olivier Martin (omartin@xxxxxxxx)
Date: Mon Sep 17 2001 - 14:05:56 GMT-3
How could you use this to trigger a link after 50% usage ? The variance is
meant to provide unequal load balancing as the routes are usually only
installed in the routing table if they have equal metrics.. May be I'm
missing something important..
Thanx
Olivier
-----Message d'origine-----
De : Church, Chuck [mailto:cchurch@USTA.com]
Envoyi : 17 septembre, 2001 12:56
@ : 'Philippon'; 'ccielab@groupstudy.com'
Objet : RE: Frame-Relay Threshold
Both IGRP and EIGRP can base a metric on load. Combining that with a
variance command might work.
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Philippon
Sent: Monday, September 17, 2001 12:24 PM
To: ccielab@groupstudy.com
Subject: Frame-Relay Threshold
I am trying to activate an ISDN BRI line when my
Frame-Relay Line reaches a 50% threshold. Here is the
catch. I DO NOT want to use the "backup interface"
and "backup load" command. Any ideas? Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:19 GMT-3