From: ohanusi anthony (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Sat Sep 15 2001 - 12:49:35 GMT-3
Hi tim ,
The other end that is the physical dce should generate the timing source.
Regards
At 07:10 AM 9/15/2001 -0700, ohanusi anthony wrote:
>Hi tim
>the physical interface can be a dte or dce but for frame relay switching,
>enable the global command frame relay switching and on the
>interface enable frame relay inft-type dce .Let the other end generate
>the timing using clock rate command.
>Hope this will help.
>Regards
>
>
>
>
>
>At 08:48 PM 9/14/2001 -0400, Timothy Ouellette wrote
>>Yeah, that's kinda where I am stuck right now. Per the diagram it says
>>s0 on router r7 should be a DTE and so should s1 on router r7. In that
>>case when I try to do a frame route between two DTE's I get an error.
>>
>>Maybe this is an error with the diagram and all the interfaces on router
>>r7 should be DCE? or are they throwing a curve ball at me?
>>
>>Also, is router r7 supposed to have an ip anywhere on it (say
>>10.10.1.4/16 since that is not on the diagram anywhere?)
>>
>>They don't want l3 to l2 mappings such as frame relay map ip statements,
>>but frame route statements are okay.
>>
>>Sorry for the beginner type questions, but for some reason I seem to
>>have forgotten all of this good stuff :(
>>
>>Tim
>>
>>routerjocky wrote:
>> >
>> > Yup. don't use subints on your frame relay switch. the subints belong on
>> > the end routers, and they'll take on any DLCI's that the frame switch
>> > advertises on that interface.
>> >
>> > Take a look at this frame relay switch configuration example:
>> >
>> > http://www.fatkid.com/html/401_advanced_ospf.html
>> >
>> > Click on Frame Relay Switch button
>> >
>> > ----- Original Message -----
>> > From: "Timothy Ouellette" <timoue@home.com>
>> > To: <ccielab@groupstudy.com>
>> > Sent: Friday, September 14, 2001 4:11 PM
>> > Subject: CCBootcamp #1 question
>> >
>> > > Rather than explain the whole scenario of CCIEBootcamp lab #1, I was
>> > > wondering if any of you good folks had any pointers(gotchas) for this
>> > > lab. I am currently trying to use sub-int's on my FR switch to have the
>> > > spoke sites communicate with each other but it's not working so well.
>> > > Can anyone drop me a hint or two for this? Thanks a bunch!
>> > >
>> > > Tim
>> > > **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:18 GMT-3