From: Chris Allen (chris.allen@xxxxxxxxxxxx)
Date: Fri Sep 14 2001 - 09:55:31 GMT-3
How are you redistributing the OSPF routes into IGRP?? Are you using the
metric option in the redistribution command or Do you have a Default Metric
set?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Cisco Lover
Sent: Friday, September 14, 2001 6:34 AM
To: ccielab@groupstudy.com
Subject: IGrp/OSPF Difficult redistribution prob on FR
Hi guys.
I am having a multipoint interface on my Hub router say S0.1, running OSPF
with /28 bit mask. I also have IGRP running on S0.2 PtP with 24 bit mask on
the same interface(diff subinterface)+router.
Now problem is that I am not able to redistribute that particular OSPF
multipoint interface into IGRP by using redistribute ospf command into
igrp??
although I can see that the other OSPF routes behing Hub router are
successfully redistributing into igrp.
2nd prob..
Although I can see those ospf routes(from routers behind HUb router) but not
able to ping them.
I have already put area 0 range ----- command on Hub router to summarise
OSPF /28 mask to /24 but cant see any summary route in ip route list as well
as this network on igrp routers.
Many thanks for ur help
Cisco lover
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:17 GMT-3