From: jonatale@xxxxxxxxxxxxx
Date: Mon Sep 10 2001 - 03:49:49 GMT-3
does the switch need to be config'd to [provide] auto-discovery for this to wor
k?
can this would for router to router ATM?"Jeff Kesemeyer" <jkesemey@bellsouth.ne
t>
Brian <signal@shreve.net>
T
Jeff Kesemeyer wrote:
> Thanks, you are correct just a bad habit I have for svc's.
>
> Jeff Kesemeyer
> CCNP, CCDP, MCSE, CNE
> www.bradshawlabs.com
> "Your CCIE Rack Rental Source"
>
>
> -----Original Message-----
> From: Brian [mailto:signal@shreve.net]
> Sent: Sunday, September 02, 2001 8:57 PM
> To: Jeff Kesemeyer
> Cc: Nicholas Jaksec; CCIE
> Subject: RE: ATM Question
>
> Jeff,
>
> qsaal (0/5) is not needed for ilmi-auto-discovery, only
> ilmi (0/16) is needed.
>
> Brian
>
> On Sun, 2 Sep 2001, Jeff Kesemeyer wrote:
>
> > Use ilmi-auto-discovery -
> > configure ilmi and qsaal.
> > Use show atm pvc or show atm vc to display the VPI/VCI of any PVC's t
he
> > router discovers.
> >
> > interface ATM0/0
> > atm pvc 1 0 16 ilmi
> > ! Configs ilmi
> > atm pvc 2 0 5 qsaal
> > ! Configs qsaal
> > atm ilmi-pvc-discovery
> > ! Enables ilmi-pvc-discovery
> >
> >
> > Jeff Kesemeyer
> > CCNP, CCDP, MCSE, CNE
> > www.bradshawlabs.com
> > "Your CCIE Rack Rental Source"
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Nicholas Jaksec
> > Sent: Sunday, September 02, 2001 7:35 PM
> > To: CCIE
> > Subject: ATM Question
> >
> >
> > I am trying to setup and ATM connection and cannot determine the VPI/VCI
> > values from the switch. How can I discover the VPI/VCI values from an ATM
> > interface. Any help would be great, thanks !!
> >
> >
> >
> > ********************************************
> > Nicholas R. Jaksec, CCNP, CCDP, MCSE+I, CNA
> > Network Systems Engineer
> > Lucent Worldwide Services
> > One North Shore Center
> > 12 Federal St. Suite 420
> > Pittsburgh, Pa 15212
> > Office: 412-330-6336 Fax: 412-323-7665
> > Pager: 1-800-467-1467
> > Email: jaksec@lucent.com
> > ********************************************
> > **Please read:http://www.groupstudy.com/list/posting.html
> > **Please read:http://www.groupstudy.com/list/posting.html
> -----------------------------------------------
> I'm buying / selling used CISCO gear!!
> email me for a quote
>
> Brian Feeny, CCIE #8036 Netjam, LLC
> signal@netjam.net http://www.netjam.net
> VISA/MC/AMEX/COD phone: 318-212-0245
> 30 day warranty fax: 318-212-0246
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:16 GMT-3