From: perkinsr@xxxxxxxxxxxxxx
Date: Fri Sep 07 2001 - 19:51:41 GMT-3
I would guess that PC1 is not setup to use RIFs, this is the same problem
that the multiring command fixes when people try to use routers where you
are using PCs. I have no clue how to set a PC up to use RIFs, try putting a
router their in its place and use the multiring command to tell the token
interface to use RIFs, that should work.
Ray
-----Original Message-----
From: Shane Miles [mailto:smiles@ftdata.com]
Sent: Friday, September 07, 2001 3:30 PM
To: 'ccielab@groupstudy.com'
Subject: SRT
Why can't PC1 ping PC2? The Cat3920 is using just a default config as well
as the Cat5000. I also can't even connect using just NetBEUI. Thanks.
(192.168.1.2/24)PC1--(3920)--To0(R1)E0--(Cat5000)--PC2(192.168.1.1/24)
R1
source-bridge ring-group 73
source-bridge transparent 73 77 1 1
!
!
interface Ethernet0
no ip address
no ip directed-broadcast
bridge-group 1
interface TokenRing0
no ip address
no ip directed-broadcast
ring-speed 16
multiring ip
source-bridge 11 1 73
source-bridge spanning
bridge 1 protocol ieee
-- Shane P. Miles **Please read:http://www.groupstudy.com/list/posting.html **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3