SRT

From: Shane Miles (smiles@xxxxxxxxxx)
Date: Fri Sep 07 2001 - 19:30:15 GMT-3

Next message: Brian Lodwick: "What all was removed from the lab with ISO CLNS?"
Previous message: louie kouncar: "RE: OSPF over Frame-Relay - Interface-DLCI vs. Map IP/Broadcas"
Next in thread: perkinsr@xxxxxxxxxxxxxx: "RE: SRT"
Maybe reply: perkinsr@xxxxxxxxxxxxxx: "RE: SRT"
Maybe reply: Shane Miles: "RE: SRT"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Why can't PC1 ping PC2? The Cat3920 is using just a default config as well
as the Cat5000. I also can't even connect using just NetBEUI. Thanks.

(192.168.1.2/24)PC1--(3920)--To0(R1)E0--(Cat5000)--PC2(192.168.1.1/24)

R1
source-bridge ring-group 73
source-bridge transparent 73 77 1 1
!
!
interface Ethernet0
no ip address
no ip directed-broadcast
bridge-group 1

interface TokenRing0
no ip address
no ip directed-broadcast
ring-speed 16
multiring ip
source-bridge 11 1 73
source-bridge spanning

bridge 1 protocol ieee

--
Shane P. Miles
**Please read:http://www.groupstudy.com/list/posting.html

Next message: Brian Lodwick: "What all was removed from the lab with ISO CLNS?"
Previous message: louie kouncar: "RE: OSPF over Frame-Relay - Interface-DLCI vs. Map IP/Broadcas"
Next in thread: perkinsr@xxxxxxxxxxxxxx: "RE: SRT"
Maybe reply: perkinsr@xxxxxxxxxxxxxx: "RE: SRT"
Maybe reply: Shane Miles: "RE: SRT"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:15 GMT-3