From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Mon Sep 03 2001 - 19:52:58 GMT-3
Try a couple things:
1. If using Hyperterm, download the newer one from Hilgraeve. Sometimes
that helps.
2. Try a different console cable and/or adapter.
3. I've had to turn off the FIFO buffers on some PC's advanced serial port
settings.
HTH,
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mohsin Iftikhar
Sent: Monday, September 03, 2001 5:51 PM
To: ccielab@groupstudy.com
Subject: Console problem.
1. I have question for the list. My 2620 router's console doesnt take any
input and only gives startup output. I want to solve this problem.
2. Is it possible that I change the NVRAM (like DRAM or Flash SIM) of
router. So i can put it on other 2620 whose console is working well.
Note:
1. Aux also not working because some one changes the configuration register
value to 0x2142. SO
It ignore NVRAM and every time goes on new setup dialog , which is not
shown in Aux port. I have only option which is console.
2. If i use cdp from switch it shows no entry for the router.
Thanks,
Mohsin.
Get 250 color business cards for FREE!
http://businesscards.lycos.com/vp/fastpath/
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:14 GMT-3