From: SFeldberg@xxxxxxxxxxxxx
Date: Thu Aug 30 2001 - 11:53:59 GMT-3
This may provide more insight
R6-Telluride(config-router)#neighbor 10.100.83.1 filter-list 2 weight 40000
% Specify remote-as or peer-group commands first
R6-Telluride#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-D-L), Version 12.0(4), RELEASE SOFTWARE (fc1)
Steve
Michael Wong
<Michael.Wong@n To: "Groupstudy - CCIELAB (E-mai
l)" <ccielab@groupstudy.com>
ec.com.au> cc:
Sent by: Subject: BGP Bad Argument ??
nobody@groupstu
dy.com
08/30/2001
06:24 AM
Please respond
to Michael Wong
Has anyone seen this problem before ??? .... is it dodgy IOS (again !!!).
I'm running ....
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.0(5)XK1, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
...... and here is the output.
p1r5(config)#router bgp 30
p1r5(config-router)#neighbor 10.100.83.1 filter-list 2 ?
in Filter incoming routes
out Filter outgoing routes
weight Assign importance to a list
p1r5(config-router)#neighbor 10.100.83.1 filter-list 2 weight ?
<0-65535> weight to apply
p1r5(config-router)#neighbor 10.100.83.1 filter-list 2 weight 40000 ?
<cr>
p1r5(config-router)#neighbor 10.100.83.1 filter-list 2 weight 40000
Bad BGP neighbor argument
p1r5(config-router)#
Thanks group .... MW :)
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:00 GMT-3