From: John Kim (albugkim@xxxxxxxxxxx)
Date: Wed Aug 29 2001 - 17:27:15 GMT-3
Could anyone tell me what's wrong on my configuration?
The below messages are dispayed on the console screen, but I can ping the
other side without any problems.
07:46:09: BR0 DDR: cdp, 281 bytes, outgoing uninteresting (no dialer-group
defin
ed)
07:46:09: BR0 DDR: sending broadcast to default destination -- failed, not
conne
cted
IOS version is 12.0(15) and one side of router configuration is as follows
(the other side is almost identical):
hostname r6
!
!
username user03 password 0 cisco
ip subnet-zero
no ip domain-lookup
isdn switch-type basic-dms100
interface BRI0
no ip address
no ip directed-broadcast
dialer pool-member 1
dialer pool-member 1
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
!
interface Dialer1
ip address 133.1.158.1 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer remote-name user03
dialer idle-timeout 600
dialer string 8358662
dialer string 8358664
dialer load-threshold 1 either
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap
ppp chap hostname user06
ppp multilink
!
ip classless
!
dialer-list 1 protocol ip permit
Thanks,
J. Kim
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:00 GMT-3